Solution Description
Item Description
Primary Attributes:
one) Created of substantial high quality aluminum alloy, light fat and non-rusting
two) Massive output torque and high radiating effectiveness
three) Clean running and reduced sounds, can function prolonged time in dreadful condition
four) Excellent-hunting physical appearance, resilient support daily life and tiny volume
5) Suitable for omnibearing installation
Main Components:
one)housing:aluminium alloy ADC12(dimension 571-090) die cast iron HT200(measurement one hundred ten-150)
2)Worm:20Cr, ZI Involute profile carbonize&quencher heat therapy make gear floor hardness up to 56-sixty two HRC Following precision grinding, carburization layer’s thickness in between .3-.5mm.
three)Worm Wheel:wearable stannum alloy CuSn10-one
Mixture Choices:
Enter:with enter shaft, With sq. flange,With IEC regular input flange
Output:with torque arm, output flange, single output shaft, double output shaft, plastic cover
Worm reducers are available with diffferent combos: NMRV+NMRV, NMRV+NRV, NMRV+Computer, NMRV+UDL, NMRV+MOTORS
Thorough Photos
Product Parameters
Old Model | New Model | Ratio | Center Distance | Electricity | Enter Dia. | Output Dia. | Output Torque | Weight |
RV571 | 7.5~100 | 25mm | .06KW~.12KW | Φ9 | Φ11 | 21N.m | .7kgs | |
RV030 | RW030 | seven.5~100 | 30mm | .06KW~.25KW | Φ9(Φ11) | Φ14 | 45N.m | one.2kgs |
RV040 | RW040 | 7.5~100 | 40mm | .09KW~.55KW | Φ9(Φ11,Φ14) | Φ18(Φ19) | 84N.m | two.3kgs |
RV050 | RW050 | 7.5~100 | 50mm | .12KW~1.5KW | Φ11(Φ14,Φ19) | Φ25(Φ24) | 160N.m | three.5kgs |
RV063 | RW063 | 7.5~a hundred | 63mm | .18KW~2.2KW | Φ14(Φ19,Φ24) | Φ25(Φ28) | 230N.m | six.2kgs |
RV075 | RW075 | seven.5~one hundred | 75mm | .25KW~4.0KW | Φ14(Φ19,Φ24,Φ28) | Φ28(Φ35) | 410N.m | 9.0kgs |
RV090 | RW090 | 7.5~100 | 90mm | .37KW~4.0KW | Φ19(Φ24,Φ28) | Φ35(Φ38) | 725N.m | 13.0kgs |
RV110 | RW110 | 7.5~a hundred | 110mm | .55KW~7.5KW | Φ19(Φ24,Φ28,Φ38) | Φ42 | 1050N.m | 35.0kgs |
RV130 | RW130 | seven.5~a hundred | 130mm | .75KW~7.5KW | Φ24(Φ28,Φ38) | Φ45 | 1550N.m | forty eight.0kgs |
RV150 | RW150 | 7.5~100 | 150mm | 2.2KW~15KW | Φ28(Φ38,Φ42) | Φ50 | eighty four.0kgs |
Exploded See:
GMRV Define Dimension:
GMRV | A | B | C | C1 | D(H8) | E(h8) | F | G | G1 | H | H1 | I | M | N | O | P | Q | R | S | T | BL | β | b | t | V |
030 | eighty | 97 | 54 | 44 | 14 | fifty five | 32 | fifty six | sixty three | 65 | 29 | 55 | forty | 57 | 30 | 75 | forty four | six.five | 21 | 5.5 | M6*ten(n=4) | 0° | 5 | 16.3 | 27 |
040 | 100 | 121.5 | 70 | sixty | eighteen(19) | 60 | 43 | seventy one | seventy eight | 75 | 36.five | 70 | 50 | seventy one.five | forty | 87 | 55 | 6.5 | 26 | six.five | M6*ten(n=4) | 45° | six | twenty.8(21.8) | 35 |
050 | a hundred and twenty | 144 | eighty | 70 | 25(24) | 70 | 49 | 85 | 92 | eighty five | 43.5 | eighty | sixty | eighty four | fifty | 100 | 64 | eight.five | thirty | 7 | M8*12(n=4) | 45° | eight | 28.3(27.3) | 40 |
063 | a hundred and forty four | 174 | one hundred | eighty five | twenty five(28) | 80 | sixty seven | 103 | 112 | ninety five | 53 | 95 | seventy two | 102 | sixty three | one hundred ten | eighty | 8.5 | 36 | 8 | M8*twelve(n=8) | 45° | 8 | 28.3(31.3) | fifty |
075 | 172 | 205 | one hundred twenty | ninety | 28(35) | ninety five | seventy two | 112 | a hundred and twenty | one hundred fifteen | fifty seven | 112.5 | 86 | 119 | 75 | a hundred and forty | 93 | eleven | forty | ten | M8*fourteen(n=8) | 45° | eight(ten) | 31.3(38.3) | sixty |
090 | 206 | 238 | a hundred and forty | a hundred | 35(38) | one hundred ten | seventy four | 130 | a hundred and forty | 130 | sixty seven | 129.five | 103 | a hundred thirty five | ninety | one hundred sixty | 102 | 13 | 45 | 11 | M10*16(n=8) | 45° | ten | 38.3(forty one.3) | 70 |
one hundred ten | 255 | 295 | a hundred and seventy | 115 | forty two | a hundred thirty | – | 144 | a hundred and fifty five | 165 | seventy four | one hundred sixty | 127.five | 167.five | 110 | two hundred | a hundred twenty five | 14 | fifty | 14 | M10*18(n=8) | 45° | 12 | forty five.3 | 85 |
130 | 293 | 335 | two hundred | a hundred and twenty | forty five | one hundred eighty | – | 155 | a hundred and seventy | 215 | eighty one | 179 | 146.five | 187.five | a hundred thirty | 250 | one hundred forty | sixteen | 60 | fifteen | M12*20(n=8) | 45° | 14 | 48.eight | 100 |
150 | 340 | four hundred | 240 | 145 | fifty | a hundred and eighty | – | 185 | two hundred | 215 | ninety six | 210 | one hundred seventy | 230 | one hundred fifty | 250 | 180 | eighteen | seventy two.5 | eighteen | M12*22(n=8) | 45° | fourteen | fifty three.eight | 120 |
Company Profile
About CZPT Transmission:
We are a professional reducer company found in HangZhou, ZHangZhoug province.
Our leading items is full variety of RV571-one hundred fifty worm reducers , also supplied GKM hypoid helical gearbox, GRC inline helical gearbox, Personal computer models, UDL Variators and AC Motors, G3 helical gear motor.
Merchandise are extensively utilised for purposes this sort of as: foodstuffs, ceramics, packing, chemical compounds, pharmacy, plastics, paper-producing, design equipment, metallurgic mine, environmental security engineering, and all sorts of computerized strains, and assembly lines.
With rapidly shipping and delivery, excellent after-product sales provider, sophisticated creating facility, our goods offer well both at house and overseas. We have exported our reducers to Southeast Asia, Jap Europe and the Middle East and so on.Our purpose is to build and innovate on the basis of high good quality, and produce a good status for reducers.
Workshop:
Exhibitions:
We participate Germany Hannver Exhibition-ZheJiang PTC Fair-Turkey Earn Eurasia
Packaging & Shipping
Packing details:Plastic Luggage+Cartons+Wooden Instances , or on request
Set up Directions
To put in the reducer, it is needed to note the pursuing problems:
1)Check out the proper rotation course of output shaft prior to fitting reducer to devices.
2)Before mounting, pls verify shaft diameter, bore diameter, important and keyway, to be positive their dimension are not deviation In order to maintain great efficiency, also pls stay away from assembling as well restricted or also unfastened.
3)Reducer have to be mounted to machines stably to keep away from vibration.
4)Whenever achievable,defend the reducer from solar radiation and bad weather.
5)In the situation of notably lengthy period of storage(4-6 months), if the oil seal is not immersed in lubricant inside of the unit, it is suggested to adjust it because the rubber could adhere to the shaft or could even have missing the elasticity.
6)Portray must certainly not go more than rubber parts and the holes on breather plug if any.
seven)When link with hollow or strong shaft, pls grease the joint to avoid lock or oxidation.
eight)Verify the right lubricant stage by means of indicator if there is 1.
9)Beginning must get location progressively, without immediately implementing the maximum load.
ten)When using numerous of motors to match reducer directly, supporting device is essential if motor is also large.
eleven)Guarantee great warmth dissipation by retaining very good air flow around the motor fan.
twelve)In the circumstance of ambient temperature40ºC, pls call the technological department.
Right after Sales Services
one.Routine maintenance Time and Warranty:Inside 1 yr after acquiring products.
2.Other Provider: Such as modeling assortment guide, set up guide, and difficulty resolution guide, etc.
FAQ
one.Q:Can you make as for every buyer drawing?
A: Sure, we offer personalized services for customers appropriately. We can use customer’s nameplate for gearboxes.
two.Q:What is your conditions of payment ?
A: thirty% deposit ahead of creation,stability T/T ahead of shipping and delivery.
three.Q:Are you a trading business or manufacturer?
A:We are a manufacurer with innovative tools and skilled employees.
4.Q:What is your generation capability?
A:8000-9000 PCS/Thirty day period
five.Q:Cost-free sample is obtainable or not?
A:Indeed, we can source totally free sample if customer concur to pay for the courier price
6.Q:Do you have any certification?
A:Yes, we have CE certificate and SGS certificate report.
Contact details:
Ms Lingel Pan
For any inquiries just truly feel free ton make contact with me. Many many thanks for your type interest to our business!
US $12-220 / Piece | |
1 Piece (Min. Order) |
###
Application: | Motor, Machinery, Marine, Agricultural Machinery, Industry |
---|---|
Hardness: | Hardened Tooth Surface |
Installation: | Horizontal Type |
Layout: | Right Angle |
Gear Shape: | Worm Gear |
Step: | Double-Step |
###
Samples: |
US$ 22/Piece
1 Piece(Min.Order) |
---|
###
Customization: |
Available
|
---|
###
Old Model | New Model | Ratio | Center Distance | Power | Input Dia. | Output Dia. | Output Torque | Weight |
RV025 | 7.5~100 | 25mm | 0.06KW~0.12KW | Φ9 | Φ11 | 21N.m | 0.7kgs | |
RV030 | RW030 | 7.5~100 | 30mm | 0.06KW~0.25KW | Φ9(Φ11) | Φ14 | 45N.m | 1.2kgs |
RV040 | RW040 | 7.5~100 | 40mm | 0.09KW~0.55KW | Φ9(Φ11,Φ14) | Φ18(Φ19) | 84N.m | 2.3kgs |
RV050 | RW050 | 7.5~100 | 50mm | 0.12KW~1.5KW | Φ11(Φ14,Φ19) | Φ25(Φ24) | 160N.m | 3.5kgs |
RV063 | RW063 | 7.5~100 | 63mm | 0.18KW~2.2KW | Φ14(Φ19,Φ24) | Φ25(Φ28) | 230N.m | 6.2kgs |
RV075 | RW075 | 7.5~100 | 75mm | 0.25KW~4.0KW | Φ14(Φ19,Φ24,Φ28) | Φ28(Φ35) | 410N.m | 9.0kgs |
RV090 | RW090 | 7.5~100 | 90mm | 0.37KW~4.0KW | Φ19(Φ24,Φ28) | Φ35(Φ38) | 725N.m | 13.0kgs |
RV110 | RW110 | 7.5~100 | 110mm | 0.55KW~7.5KW | Φ19(Φ24,Φ28,Φ38) | Φ42 | 1050N.m | 35.0kgs |
RV130 | RW130 | 7.5~100 | 130mm | 0.75KW~7.5KW | Φ24(Φ28,Φ38) | Φ45 | 1550N.m | 48.0kgs |
RV150 | RW150 | 7.5~100 | 150mm | 2.2KW~15KW | Φ28(Φ38,Φ42) | Φ50 | 84.0kgs |
###
GMRV | A | B | C | C1 | D(H8) | E(h8) | F | G | G1 | H | H1 | I | M | N | O | P | Q | R | S | T | BL | β | b | t | V |
030 | 80 | 97 | 54 | 44 | 14 | 55 | 32 | 56 | 63 | 65 | 29 | 55 | 40 | 57 | 30 | 75 | 44 | 6.5 | 21 | 5.5 | M6*10(n=4) | 0° | 5 | 16.3 | 27 |
040 | 100 | 121.5 | 70 | 60 | 18(19) | 60 | 43 | 71 | 78 | 75 | 36.5 | 70 | 50 | 71.5 | 40 | 87 | 55 | 6.5 | 26 | 6.5 | M6*10(n=4) | 45° | 6 | 20.8(21.8) | 35 |
050 | 120 | 144 | 80 | 70 | 25(24) | 70 | 49 | 85 | 92 | 85 | 43.5 | 80 | 60 | 84 | 50 | 100 | 64 | 8.5 | 30 | 7 | M8*12(n=4) | 45° | 8 | 28.3(27.3) | 40 |
063 | 144 | 174 | 100 | 85 | 25(28) | 80 | 67 | 103 | 112 | 95 | 53 | 95 | 72 | 102 | 63 | 110 | 80 | 8.5 | 36 | 8 | M8*12(n=8) | 45° | 8 | 28.3(31.3) | 50 |
075 | 172 | 205 | 120 | 90 | 28(35) | 95 | 72 | 112 | 120 | 115 | 57 | 112.5 | 86 | 119 | 75 | 140 | 93 | 11 | 40 | 10 | M8*14(n=8) | 45° | 8(10) | 31.3(38.3) | 60 |
090 | 206 | 238 | 140 | 100 | 35(38) | 110 | 74 | 130 | 140 | 130 | 67 | 129.5 | 103 | 135 | 90 | 160 | 102 | 13 | 45 | 11 | M10*16(n=8) | 45° | 10 | 38.3(41.3) | 70 |
110 | 255 | 295 | 170 | 115 | 42 | 130 | – | 144 | 155 | 165 | 74 | 160 | 127.5 | 167.5 | 110 | 200 | 125 | 14 | 50 | 14 | M10*18(n=8) | 45° | 12 | 45.3 | 85 |
130 | 293 | 335 | 200 | 120 | 45 | 180 | – | 155 | 170 | 215 | 81 | 179 | 146.5 | 187.5 | 130 | 250 | 140 | 16 | 60 | 15 | M12*20(n=8) | 45° | 14 | 48.8 | 100 |
150 | 340 | 400 | 240 | 145 | 50 | 180 | – | 185 | 200 | 215 | 96 | 210 | 170 | 230 | 150 | 250 | 180 | 18 | 72.5 | 18 | M12*22(n=8) | 45° | 14 | 53.8 | 120 |
US $12-220 / Piece | |
1 Piece (Min. Order) |
###
Application: | Motor, Machinery, Marine, Agricultural Machinery, Industry |
---|---|
Hardness: | Hardened Tooth Surface |
Installation: | Horizontal Type |
Layout: | Right Angle |
Gear Shape: | Worm Gear |
Step: | Double-Step |
###
Samples: |
US$ 22/Piece
1 Piece(Min.Order) |
---|
###
Customization: |
Available
|
---|
###
Old Model | New Model | Ratio | Center Distance | Power | Input Dia. | Output Dia. | Output Torque | Weight |
RV025 | 7.5~100 | 25mm | 0.06KW~0.12KW | Φ9 | Φ11 | 21N.m | 0.7kgs | |
RV030 | RW030 | 7.5~100 | 30mm | 0.06KW~0.25KW | Φ9(Φ11) | Φ14 | 45N.m | 1.2kgs |
RV040 | RW040 | 7.5~100 | 40mm | 0.09KW~0.55KW | Φ9(Φ11,Φ14) | Φ18(Φ19) | 84N.m | 2.3kgs |
RV050 | RW050 | 7.5~100 | 50mm | 0.12KW~1.5KW | Φ11(Φ14,Φ19) | Φ25(Φ24) | 160N.m | 3.5kgs |
RV063 | RW063 | 7.5~100 | 63mm | 0.18KW~2.2KW | Φ14(Φ19,Φ24) | Φ25(Φ28) | 230N.m | 6.2kgs |
RV075 | RW075 | 7.5~100 | 75mm | 0.25KW~4.0KW | Φ14(Φ19,Φ24,Φ28) | Φ28(Φ35) | 410N.m | 9.0kgs |
RV090 | RW090 | 7.5~100 | 90mm | 0.37KW~4.0KW | Φ19(Φ24,Φ28) | Φ35(Φ38) | 725N.m | 13.0kgs |
RV110 | RW110 | 7.5~100 | 110mm | 0.55KW~7.5KW | Φ19(Φ24,Φ28,Φ38) | Φ42 | 1050N.m | 35.0kgs |
RV130 | RW130 | 7.5~100 | 130mm | 0.75KW~7.5KW | Φ24(Φ28,Φ38) | Φ45 | 1550N.m | 48.0kgs |
RV150 | RW150 | 7.5~100 | 150mm | 2.2KW~15KW | Φ28(Φ38,Φ42) | Φ50 | 84.0kgs |
###
GMRV | A | B | C | C1 | D(H8) | E(h8) | F | G | G1 | H | H1 | I | M | N | O | P | Q | R | S | T | BL | β | b | t | V |
030 | 80 | 97 | 54 | 44 | 14 | 55 | 32 | 56 | 63 | 65 | 29 | 55 | 40 | 57 | 30 | 75 | 44 | 6.5 | 21 | 5.5 | M6*10(n=4) | 0° | 5 | 16.3 | 27 |
040 | 100 | 121.5 | 70 | 60 | 18(19) | 60 | 43 | 71 | 78 | 75 | 36.5 | 70 | 50 | 71.5 | 40 | 87 | 55 | 6.5 | 26 | 6.5 | M6*10(n=4) | 45° | 6 | 20.8(21.8) | 35 |
050 | 120 | 144 | 80 | 70 | 25(24) | 70 | <span sty |