ZD Higher CZPT and CZPTx Equipment Sq. 120mm AF Sequence Planetary CZPT
Solution Description
AF Sequence Planetary CZPT in addition provides entrance and rear oil seals, makes use of the output shaft double assistance construction and layout of helix equipment, which makes the gear meshing smoother and steady, the AF Collection can be utilised in different handle transmission fields with servo motors. The backlash of the AF series is significantly less than 5 arc.min and the reduction ratio covers 3~one hundred.
The Product Advantages of Planetary CZPT:
1.Flexible composition layout, in line with different functioning conditions.
two.Ring gear processing engineering: Employing inner gear slotting machine and hobbling device the precision of ring gear soon after processing can achieve GB7.
three.Hardened equipment secondary scraping technologies: secondary high-velocity dry chopping of gear removes gear deformation caused by heat treatment. Gear accuracy can achieve GB6.
4.CZPT backlash tests.
How To Go through
120 AF 10 ( ) (S) – 40 T1
a b c d e f g
| a | Frame Dimensions | one hundred twenty=120mm |
| b | Series code: AF | Square mounting flange series |
| c | Reduction Ratio | One Phase: 3,four,5,six,7,8,nine,ten Two Stages: fifteen,20,twenty five,thirty,35,40,forty five,50,sixty,70,80,ninety,a hundred |
| d | Backlash | One Stage: ≤5arc.min Two Stages: ≤8arc.min |
| e | Input shaft kind | S: All round locking (Omitted) (No matter of regardless of whether the motor has a keyway) S1: Locking with locking ring (No matter no matter whether the motor has a keyway ) S2: Locking with keyway (Enter shaft with crucial) K: With keyway A: Other kinds (Remember to speak to with us) |
| f | Applicable servo motor electricity (W),Please contact us for certain electricity | |
| g | You should get in touch with us for the mounting variety of the flange | |
Spesifications & Specifics
| Merchandise Sort | Device | Number Of Phase | Reduction Ratio | 120AF |
| Rated Output Torque | N.M | one | three | 144 |
| four | two hundred | |||
| 5 | 220 | |||
| seven | two hundred | |||
| eight | 180 | |||
| 10 | 155 | |||
| 2 | 12 | 209 | ||
| fifteen | 209 | |||
| sixteen | 275 | |||
| 20 | 275 | |||
| twenty five | 280 | |||
| 32 | 260 | |||
| 35 | 265 | |||
| forty | 245 | |||
| 50 | 280 | |||
| 64 | 180 | |||
| 80 | a hundred and eighty | |||
| 100 | 165 | |||
| Max. radial power* | N | one,two | 3~one hundred | 2520 |
| Max. axial pressure* | one,two | 3~a hundred | 1260 | |
| Full Load Effectiveness | % | one | three~10 | ≥97% |
| two | fifteen~100 | ≥94% | ||
| Backlash | arc.min | one | three~10 | ≤5 |
| 2 | fifteen~100 | ≤8 |
*Optimum radial drive and greatest axial power, when the output is 100rpm, it functions on the middle placement (L/two) of the output shaft.
Dimensions (mm):
| Merchandise variety | No. of stage | L1 | L2 | L3 | L4 | L5 | L6 | L7 | L8 | L9 | L10 | D1 | D2 | |
| 120AF | one | 196 | forty eight | ninety three | 55 | fifty | 40 | 5 | four | 58 | ten | Φ145 | Φ110G7 | |
| 2 | 207 | 104 | ||||||||||||
| No. of phase | D3 | D4 | D5 | D6 | D7 | D8 | D9 | D10 | B1 | H1 | G1 | G3 | Q3 | |
| one,two | ≤24G7 | Φ25h7 | Φ40 | Φ110h7 | Φ115 | Φ130 | Φ8.5 | a hundred and fifteen | eight | 28 | M8×21 | M10×22 | a hundred thirty |
Particulars of AF series Planetary CZPT
System
Compact output shaft system
It adopts the design of output shaft built-in method, compact framework, large rigidity, and it can stand up to big affect. Area the input coupling and the solar equipment at the middle of the output shaft to boost the concentricity of the elements, thereby effectively controlling the equipment clearance and enhancing the backlash of the complete gearbox.
Structure
Entire needle structure
The interior bearing of the planetary equipment adopts a entire-needle layout, the internal hole is made by a grinding approach, the surface area hardness is HRC60, and the cylindricity is much less than .003mm.
Other Product Types of AF collection Planetary CZPT
More goods,remember to click listed here…
Assembly Process
Make sure you comply with the tips bellow to assemble the servo motor and reducer. Other than for specified goods, there are numerous proportions of servo motors, some motors may not be able to link with flanges.Therefore, be sure to use the suitable motor which is specified when location your purchase.
In Case Of Assembling A Motor With out Essential
1.Get off the rubber cap, turn the enter shaft, and match the head of the bolt to the gap of the rubber cap. Make sure that the correcting bolt is loosened.
2.Gradually put the motor shaft into the enter shaft (Guarantee that it is smoothly set in CZPT jam.). Be careful not to be inserted with the motor tilted.
three.Connect the motor to the reducer and fasten the bolt with selected fastening torque. See Table one.
4.CZPTen the correcting bolt of the input shaft with specified fastening torque wrench, etc. See Desk two.
five.Put on the rubber cap.
Table 1
| Motor Combination Bolt | CZPTening Torque | |
| (N·m) | (kgf·cm) | |
| M3 | one. | ten |
| M4 | 3. | 30 |
| M5 | 5.8 | sixty |
| M6 | nine.eight | 100 |
| M8 | 19.six | two hundred |
| M10 | 39.two | four hundred |
| M12 | sixty eight.six | seven-hundred |
| M16 | 168 | 1650 |
Table 2
| Mix Bolt | CZPTening Torque | |
| (N·m) | (kgf·cm) | |
| M3 | 1.five | fifteen |
| M4 | 3.five | 35 |
| M5 | 7.1 | 71 |
| M6 | twelve | 120 |
| M8 | thirty | 300 |
| M10 | sixty | 612 |
Company Profile
Delivery
Our Companies
1.Maintenance time & Warranty: 1 12 months right after leaving manufacturing facility
2.Other provider: Including modeling variety manual, set up guidebook, and difficulty capturing manual, etc.
FAQ
Q: What’re your primary products?
A: We currently make Brushed DC Motors, Brushed DC Equipment Motors, Planetary DC Equipment Motors, Brushless DC Motors, AC Motors, Substantial CZPT Planetary CZPT and CZPT Cycloidal CZPT and so forth.. You can check out the specifications for above motors on our internet site and you can electronic mail us to advocate required motors per your specification too.
Q: How to decide on a suitable motor or gearbox?
A:If you have motor photos or drawings to show us, or you have in depth specifications, this kind of as, voltage, speed, torque, motor dimensions, functioning manner of the motor, necessary life time and noise stage and so forth, remember to do not hesitate to enable us know, then we can advise ideal motor for every your request appropriately.
Q: Do you have a CZPT service for your common motors or gearboxes?
A: Indeed, we can customize for every your request for the voltage, velocity, torque and shaft size/form. If you need to have extra wires/cables soldered on the terminal or need to include connectors, or capacitors or EMC we can make it way too.
Q: Do you have an individual style provider for motors?
A: Sure, we would like to design motors individually for our buyers, but some type of molds are necessory to be developped which may require actual expense and style charging.
Q: What is actually your guide time?
A: CZPTly speaking, our regular common item will need 15-30days, a little bit more time for CZPT items. But we are extremely adaptable on the lead time, it will count on the certain orders.
