Non-Rusting Aluminum Housing G3lm-FM-Ls-Fs Helical Gear Motors for Poultry Farm

 

Product Description

Main Characteristics:
one) Produced of higher high quality materials,  non-rustingBoth flange and foot mounting CZPT and appropriate for all-round set up
2) Big output torque and high radiating performance
three)Specific grinding helical equipment with Sleek managing and lower sounds, no deformation,can perform long time in dreadful problem
four)Good appearance, resilient services life and little quantity, compact framework
five)Both two and a few phase CZPT with extensive ratio range from five to two hundred
6)CZPT output shaft diameter CZPT eighteen-22-28-32-forty-50mm
seven)Modular building enlarge ratio from five to 1400

Main Resources:
1)housing with aluminium alloyand forged iron substance
two)Output Shaft Substance:20CrMnTi
3)Excellent high quality no noise bearings to hold long support lifestyle
4)High performance oil seal to prevent from oil leakage

Purposes:
G3 Series helical equipment motor are broad employed for all types of automatic products, this kind of as chip removing device, conveyor, packaging equipment, woodworking equipment, farming products, slurry scraper ,dryer, mixer and so on.

In depth Photographs

Merchandise Parameters

 

(n1=1400r/min  50hz)
norminal ratio			five	10	fifteen	20	25	thirty	40	fifty	60	eighty	100	a hundred	one hundred twenty	one hundred sixty	200
.1kw	output shaft		Ø18								Ø22
	n2* (r/min)		282	138	ninety two	70	56	forty six	35	28	23	eighteen	fourteen	–	eleven	9	7
	M2(Nm)	50hz	3.two	six.5	nine.eight	twelve.nine	16.1	19.6	25.seven	31.1	37.5	49.five	62.9	–	76.one	a hundred.seven	one hundred twenty five.four
		60hz	three	five	eight	eleven	thirteen	seventeen	21	26	31	forty one	52	–	63	eighty four	one zero five
	Fr1(N)		588	882	980	1180	1270	1370	1470	1570	2160	2450	2450	2450	2450	2450	2450
	Fr2(N)		176
norminal ratio			5	ten	15	twenty	25	30	forty	50	60	80	a hundred	one hundred	120	one hundred sixty	two hundred
.2kw	output shaft		Ø18					Ø22						Ø28
	n2* (r/min)		282	138	92	70	56	45	35	29	23	18	14	13	12	eight	7
	M2(Nm)	50hz	six.five	12.6	19.one	26.3	32.6	38.nine	fifty.4	sixty three	75.6	one hundred.8	103.9	a hundred twenty five.4	a hundred and fifty	200.four	250.seven
		60hz	five.four	10.five	16.6	21.nine	27.one	32.four	forty two	52.five	63	eighty four	86.six	104.5	a hundred twenty five	167	208.9
	Fr1(N)		588	882	980	1180	1270	1760	1860	1960	2160	2450	2450	2840	3330	3430	3430
	Fr2(N)		196
norminal ratio			five	ten	fifteen	20	25	thirty	40	50	sixty	eighty	a hundred	a hundred	120	160	200
.4kw	output shaft		Ø22					Ø28						Ø32
	n2* (r/min)		288	a hundred and forty four	92	72	fifty eight	47	36	29	24	18	14	fourteen	twelve	9	seven
	M2(Nm)	50hz	12.nine	25	38.six	fifty one.four	sixty five.four	78.two	one hundred.seven	a hundred twenty five.four	a hundred and fifty	200.4	206.8	250.seven	301.one	400.seven	461.8
		60hz	10.7	twenty.8	32.one	42.9	54.5	sixty five.two	eighty three.9	104.5	a hundred twenty five	167	172.3	208.9	250.9	333.nine	384.eight
	Fr1(N)		882	1180	1370	1470	1670	2550	2840	3140	3430	3430	3430	4900	5880	5880	5880
	Fr2(N)		245
norminal ratio			5	ten	fifteen	20	25	thirty	40	50	sixty	eighty	100	a hundred	one hundred twenty	a hundred and sixty	two hundred
.75kw	output shaft		Ø28					Ø32						Ø40
	n2* (r/min)		278	a hundred and forty	94	69	fifty eight	46	35	29	24	18	14	14	eleven	nine	7
	M2(Nm)	50hz	24.6	48.2	seventy two.nine	ninety seven.five	122.1	a hundred forty five.seven	187.five	235.7	282.nine	376.one	387.nine	439	527	703	764
		60hz	twenty.five	40.two	sixty.7	81.three	201.8	121.4	156.three	196.four	235.7	313.4	323.two	366	439	585	732
	Fr1(N)		1270	1760	2160	2350	2450	4571	4210	4610	5490	5880	5880	7060	7060	7060	7060
	Fr2(N)		294
norminal ratio			five	10	fifteen	twenty	twenty five	thirty	40	50	60	eighty	100	a hundred	120	a hundred and sixty	two hundred
one.5kw	output shaft		Ø32					Ø40						Ø50
	n2* (r/min)		280	one hundred forty	ninety three	70	55	forty seven	34	27	24	17	fourteen	13	12	8	seven
	M2(Nm)	50hz	48.2	ninety seven.five	one hundred forty five.seven	193.nine	242.1	272	351	439	527	703	724	878	1060	1230	1230
		60hz	40.2	eighty one.3	121.four	161.six	201.eight	226	293	366	439	585	603	732	878	1170	1230
	Fr1(N)		1760	2450	2840	3230	3820	5100	5880	7060	7060	7060	7060	9800	9800	9800	9800
	Fr2(N)		343
norminal ratio			five	ten	fifteen	20	twenty five	30	forty	50	sixty	80	a hundred
two.2kw	output shaft		Ø40					Ø50
	n2* (r/min)		272	136	ninety five	sixty eight	54	45	36	28	24	18	fourteen
	M2(Nm)	50hz	sixty seven	133	two hundred	266	332	399	515	644	773	1571	1230
		60hz	fifty six	111	167	221	277	332	429	537	644	858	1080
	Fr1(N)		2160	3140	3530	4571	4700	6960	7250	8620	9800	9800	9800
	Fr2(N)		392

Outline and mounting dimension:

G3FM: Three Section Gear MOTOR WITH FLANGE                                                                                       (n1=1400r/min)
Power kw	output shaft	ratio	A		F	I	J	M	O	O1	P	Q	R	S	T	U	W	X	Y	Y1
			normal	brake
.1kw	Ø18	5-10-15-twenty-twenty five-30-40-50	236	270	192.five	eleven	16.five	a hundred and seventy	four	10	thirty	a hundred forty five	35	18	twenty.five	129	6	157	eighty	eighty one
	Ø22	sixty-80-100-120-a hundred and sixty-200	262	296	197.five	11	19	185	four	twelve	forty	148	forty seven	22	24.5	129	six	171.five	89.5	83.five
.2kw	Ø18	5-ten-fifteen-twenty-25	267	270	192.five	eleven	16.5	170	four	10	thirty	145	35	18	20.five	129	6	161	eighty	eighty one
	Ø22	thirty-forty-fifty-60-eighty-100	293	296	197.five	11	19	185	4	twelve	40	148	forty seven	22	24.five	129	6	171.five	89.five	83.five
	Ø28	a hundred-one hundred twenty-one hundred sixty-two hundred	306	309.five	208.five	11	23.five	215	four	15	45	170	fifty	28	31	129	8	198.five	105.five	88
.4kw	Ø22	five-10-15-20-25	314	324.5	204	11	19	185	four	twelve	forty	148	forty seven	22	24.5	139	6	171.five	89.five	88.five
	Ø28	thirty-forty-fifty-60-eighty-100	330	337.5	215	eleven	23.five	215	4	fifteen	forty five	a hundred and seventy	50	28	31	139	eight	198.5	a hundred and five.5	93
	Ø32	a hundred-one hundred twenty-160-200	349	357	229.5	13	28.five	250	4	fifteen	fifty five	180	sixty	32	35	139	ten	234	126	ninety eight
.75kw	Ø28	5-10-15-20-twenty five	350.5	343.five	227.five	11	23.5	215	4	15	forty five	a hundred and seventy	fifty	28	31	159	8	198.five	a hundred and five.five	103
	Ø32	thirty-forty-fifty-60-eighty-100	379.five	387	242	13	28.5	250	four	15	fifty five	180	sixty	32	35	159	10	234	126	108
	Ø40	100-a hundred and twenty-one hundred sixty-two hundred	401.five	408.5	270	18	34	310	5	18	sixty five	230	71	40	43	185	twelve	284	149	126.five
one.5kw	Ø32	5-ten-fifteen-twenty-25	420.5	441	254	thirteen	28.5	250	5	15	55	180	sixty	32	35	185	10	234	126	121
	Ø40	30-forty-50-60-eighty-one hundred	457.five	478	270	eighteen	34	310	5	eighteen	sixty five	230	seventy one	forty	forty three	185	twelve	284	149	126.five
	Ø50	a hundred-120-a hundred and sixty-two hundred	485.five	506	300	22	forty	360	5	twenty five	seventy five	270	eighty three	fifty	53.five	185	14	325	173.five	132.5
2.2kw	Ø40	5-ten-15-twenty-25	466.5	487	270	18	34	310	5	18	65	230	71	40	43	185	twelve	284	149	126.5
	Ø50	thirty-40-50-sixty-eighty-a hundred	510.five	531	300	22	forty	360	five	25	75	270	83	50	53.five	185	fourteen	325	173.five	132.five

 

G3LM: Three Phase Gear MOTOR WITH FOOT                                                                                                               (n1=1400r/min)
Electrical power kw	output shaft	ratio	A		D	E	F	J	G	H	K	P	S	T	U	V	W	X	Y	Y1
			standard	brake
.1kw	Ø18	five-10-15-twenty-twenty five-thirty-40-fifty	236	270	40	a hundred and ten	135	16.five	sixty five	nine	45	thirty	eighteen	20.five	129	183	6	133	eighty five	10
	Ø22	60-eighty-100-120-one hundred sixty-two hundred	262	296	65	130	one hundred fifty five	19	ninety	eleven	fifty five	40	22	24.5	129	193	6	139.5	90	twelve
.2kw	Ø18	5-10-15-20-25	267	270	forty	a hundred and ten	a hundred thirty five	16.5	sixty five	nine	45	thirty	18	twenty.5	129	183	6	133	85	ten
	Ø22	thirty-40-fifty-60-80-100	293	296	65	one hundred thirty	a hundred and fifty five	19	90	11	fifty five	40	22	24.5	129	193	6	139.5	ninety	twelve
	Ø28	a hundred-120-160-two hundred	306	309.5	ninety	140	one hundred seventy five	23.five	125	11	sixty five	forty five	28	31	129	203	eight	170	a hundred and ten	15
.4kw	Ø22	5-ten-fifteen-20-25	314	324.five	sixty five	a hundred thirty	one hundred fifty five	19	90	eleven	55	40	22	24.five	139	199.five	6	141.five	90	twelve
	Ø28	30-forty-50-sixty-eighty-a hundred	330	337.five	90	140	one hundred seventy five	23.five	a hundred twenty five	eleven	sixty five	45	28	31	139	210	eight	a hundred and seventy	one hundred ten	15
	Ø32	100-120-160-200	349	357	a hundred thirty	a hundred and seventy	208	28.five	a hundred and seventy	13	70	fifty five	32	35	139	226	ten	198	130	eighteen
.75kw	Ø28	five-ten-fifteen-twenty-25	350.5	343.5	ninety	a hundred and forty	175	23.five	125	11	sixty five	forty five	28	31	159	222	8	one hundred seventy	a hundred and ten	fifteen
	Ø32	30-forty-fifty-sixty-eighty-100	379.5	387	one hundred thirty	a hundred and seventy	208	28.five	170	13	70	fifty five	32	35	159	238.5	ten	198	one hundred thirty	eighteen
	Ø40	a hundred-120-one hundred sixty-two hundred	401.five	408.five	a hundred and fifty	210	254	34	196	15	90	sixty five	40	43	185	249	12	230	one hundred fifty	20
one.5kw	Ø32	five-10-15-20-25	420.5	441	one hundred thirty	170	208	28.5	170	thirteen	70	fifty five	32	35	185	250.five	ten	198	one hundred thirty	18
	Ø40	30-forty-50-sixty-eighty-one hundred	457.5	478	one hundred fifty	210	254	34	196	15	90	65	40	forty three	185	260	12	230	a hundred and fifty	twenty
	Ø50	one hundred-120-160-200	485.5	506	160	230	290	forty	210	eighteen	a hundred	seventy five	50	fifty three.five	185	288	14	265	170	25
two.2kw	Ø40	five-ten-fifteen-20-twenty five	466.5	487	a hundred and fifty	210	254	34	196	fifteen	90	65	forty	43	185	260	12	230	a hundred and fifty	twenty
	Ø50	thirty-forty-50-sixty-eighty-a hundred	510.5	531	160	230	290	forty	210	eighteen	a hundred	seventy five	50	53.5	185	288	14	265	a hundred and seventy	twenty five

 

G3FS: IEC Equipment REDUCER WITH FOOT                                                                                                                           (n1=1400r/min)
Electricity kw	output shaft	ratio	A	B	C	F	I	J	L	M	N	O	O1	P	Q	R	S	S1	T	T1	W	W1	X	Y	Y1
.12kw	Ø18	five-ten-fifteen-twenty-25-thirty-40-50	147	95	one hundred fifteen	154	eleven	16.five	four.5	170	a hundred and forty	4	10	30	a hundred forty five	35	eighteen	eleven	twenty.five	twelve.eight	6	four	163	80	86.5
	Ø22	sixty-80-100-one hundred twenty-one hundred sixty-200	173	ninety five	one hundred fifteen	164	11	19	4.5	185	one hundred forty	four	twelve	forty	148	forty seven	22	11	24.5	12.8	six	four	171.five	89.5	89
.18kw	Ø18	five-10-fifteen-20-25	147	95	a hundred and fifteen	154	eleven	16.five	4.5	170	140	4	ten	30	145	35	eighteen	11	20.5	12.eight	6	4	163	80	86.5
	Ø22	30-forty-50-60-80-a hundred	173	95	one hundred fifteen	164	eleven	19	four.5	185	140	four	twelve	40	148	forty seven	22	11	24.five	12.8	6	4	171.five	89.five	89
	Ø28	100-120-a hundred and sixty-200	186.5	95	one hundred fifteen	186	eleven	23.5	four.five	215	a hundred and forty	4	fifteen	45	one hundred seventy	50	28	eleven	31	twelve.8	8	four	198.five	one zero five.5	ninety three.5
.37kw	Ø22	five-10-fifteen-twenty-25	181.five	a hundred and ten	one hundred thirty	164	eleven	19	4.five	185	a hundred and sixty	4	twelve	forty	148	47	22	fourteen	24.5	16.3	6	five	201	89.5	99
	Ø28	30-forty-fifty-60-eighty-one hundred	198	one hundred ten	a hundred thirty	186	11	23.5	4.five	215	a hundred and sixty	4	15	forty five	170	fifty	28	fourteen	31	16.3	8	5	198.5	one hundred and five.five	103.5
	Ø32	one hundred-one hundred twenty-160-two hundred	216.five	one hundred ten	one hundred thirty	215	13	28.5	4.5	250	one hundred sixty	four	fifteen	55	a hundred and eighty	sixty	32	14	35	16.three	ten	five	234	126	108.five
.75kw	Ø28	five-10-15-twenty-25	206.5	a hundred thirty	one hundred sixty five	185	11	23.five	four.five	215	two hundred	four	15	45	170	fifty	28	19	31	21.eight	8	6	216.five	one zero five.5	123.5
	Ø32	30-forty-fifty-60-eighty-one hundred	235	a hundred thirty	165	215	13	28.5	four.five	250	200	four	fifteen	55	one hundred eighty	60	32	19	35	21.8	ten	6	236.5	126	128.5
	Ø40	100-one hundred twenty-160-200	260.five	a hundred thirty	165	270	18	34	four.5	310	200	5	eighteen	sixty five	230	71	forty	19	43	21.eight	twelve	eight	284	149	134
one.5kw	Ø32	five-10-fifteen-twenty-25	252	a hundred thirty	one hundred sixty five	215	thirteen	28.5	four.five	250	two hundred	five	15	55	one hundred eighty	sixty	32	24	35	27.3	10	8	236.5	126	128.five
	Ø40	30-forty-fifty-60-eighty-100	293.5	130	a hundred sixty five	270	18	34	4.five	310	200	5	18	65	230	seventy one	40	24	43	27.3	twelve	eight	284	149	134
	Ø50	100-one hundred twenty-160-200	321.five	one hundred thirty	one hundred sixty five	three hundred	22	forty	4.5	360	200	5	25	75	270	eighty three	50	24	fifty three.five	27.3	14	8	323.5	173.five	140
2.2kw	Ø40	5-ten-15-twenty-twenty five	290	one hundred eighty	215	270	18	34	5.five	310	250	5	eighteen	sixty five	230	71	forty	28	43	31.3	12	8	284	149	134
	Ø50	thirty-40-50-60-eighty-100	334	180	215	300	22	forty	5.5	360	250	5	twenty five	75	270	eighty three	50	28	53.five	31.three	fourteen	eight	323.5	173.5	one hundred forty

 

G3LS: IEC Equipment REDUCER WITH FOOT                                                                                                                           (n1=1400r/min)
Electrical power kw	output shaft	ratio	A	B	C	D	E	F	G	H	J	K	L	N	P	S	S1	T	T1	W	W1	X	Y	Y1	Z
.12kw	Ø18	five-10-15-twenty-twenty five-30-forty-50	147	ninety five	one hundred fifteen	40	a hundred and ten	135	65	nine	sixteen.5	forty five	four.five	140	30	eighteen	eleven	20.5	twelve.8	six	4	138.5	85	ten	M8
	Ø22	60-eighty-100-a hundred and twenty-a hundred and sixty-200	173	95	a hundred and fifteen	sixty five	a hundred thirty	154	90	11	19	fifty five	four.5	a hundred and forty	40	22	11	24.5	12.8	6	4	141	90	12	M8
.18kw	Ø18	5-10-fifteen-twenty-twenty five	147	95	115	forty	a hundred and ten	one hundred thirty five	sixty five	9	sixteen.5	45	four.5	one hundred forty	30	eighteen	11	20.5	12.eight	six	four	138.five	85	ten	M8
	Ø22	30-40-fifty-60-80-one hundred	173	ninety five	115	sixty five	one hundred thirty	154	ninety	eleven	19	fifty five	four.5	one hundred forty	40	22	eleven	24.five	12.8	6	four	141	ninety	twelve	M8
	Ø28	100-a hundred and twenty-a hundred and sixty-two hundred	186.five	95	a hundred and fifteen	ninety	one hundred forty	a hundred seventy five	a hundred twenty five	11	23.5	sixty five	four.5	one hundred forty	45	28	eleven	31	12.8	eight	four	a hundred and seventy	a hundred and ten	15	M8
.37kw	Ø22	five-ten-fifteen-20-25	181.five	one hundred ten	a hundred thirty	sixty five	a hundred thirty	154	90	11	19	55	4.5	a hundred and sixty	40	22	fourteen	24.5	sixteen.three	6	5	151	90	twelve	M8
	Ø28	thirty-forty-fifty-sixty-80-100	198	one hundred ten	a hundred thirty	ninety	one hundred forty	175	125	11	23.five	65	four.five	one hundred sixty	forty five	28	14	31	16.three	eight	five	170	110	fifteen	M8
	Ø32	100-one hundred twenty-a hundred and sixty-two hundred	216.5	one hundred ten	one hundred thirty	130	one hundred seventy	208	170	13	28.five	70	4.5	160	55	32	14	35	16.3	ten	five	198	a hundred thirty	eighteen	M8
.75kw	Ø28	5-ten-15-twenty-25	206.five	130	a hundred sixty five	90	140	one hundred seventy five	one hundred twenty five	11	23.5	65	four.5	two hundred	45	28	19	31	21.8	eight	six	186.5	a hundred and ten	15	M10
	Ø32	thirty-40-fifty-60-eighty-a hundred	235	130	165	one hundred thirty	one hundred seventy	208	one hundred seventy	13	28.five	70	4.5	two hundred	fifty five	32	19	35	21.eight	10	6	201.five	a hundred thirty	18	M10
	Ø40	a hundred-a hundred and twenty-a hundred and sixty-200	260.5	one hundred thirty	one hundred sixty five	a hundred and fifty	210	254	196	fifteen	34	ninety	4.five	200	65	forty	19	forty three	21.eight	12	eight	230	a hundred and fifty	twenty	M10
one.5kw	Ø32	5-ten-fifteen-twenty-25	252	one hundred thirty	a hundred sixty five	130	170	208	one hundred seventy	thirteen	28.five	70	four.five	two hundred	55	32	24	35	27.three	10	eight	201.five	one hundred thirty	eighteen	M10
	Ø40	thirty-40-50-60-80-100	293.five	130	a hundred sixty five	150	210	254	196	fifteen	34	90	4.five	200	sixty five	40	24	forty three	27.three	twelve	eight	230	a hundred and fifty	twenty	M10
	Ø50	100-120-160-200	321.five	130	165	one hundred sixty	230	290	210	18	forty	a hundred	four.5	200	75	50	24	fifty three.five	27.3	fourteen	8	265	170	twenty five	M10
2.2kw	Ø40	5-ten-fifteen-20-25	290	one hundred eighty	215	one hundred fifty	210	254	196	fifteen	34	90	five.5	250	sixty five	40	28	forty three	31.three	12	eight	230	one hundred fifty	20	M12
	Ø50	30-40-50-sixty-eighty-100	334	180	215	one hundred sixty	230	290	210	18	40	one hundred	five.5	250	seventy five	fifty	28	fifty three.five	31.three	14	8	265	one hundred seventy	twenty five	M12

Business Profile

We are a professional reducer producer located in HangCZPT, ZHangCZPTg province.Our foremost goods is  full range of RV571-one hundred fifty worm reducers , also provided GKM hypoid helical gearbox, GRC inline helical gearbox, Laptop models, UDL Variators and AC Motors, G3 helical gear motor.Items are widely used for apps such as: foodstuffs, ceramics, packing, chemical substances, pharmacy, plastics, paper-generating, design equipment, metallurgic mine, environmental defense engineering, and all kinds of automatic traces, and assembly lines.With rapidly delivery, outstanding right after-income provider, CZPTd creating facility, our merchandise sell well  both at property and abroad. We have exported our reducers to Southeast Asia, CZPT CZPTpe and the Center CZPT and so on.Our purpose is to build and innovate on the foundation of large good quality, and create a good reputation for reducers.

Workshop:

 

Exhibition

ZheCZPT PTC Honest:

Packaging & Shipping and delivery

After Income Support

one.Routine maintenance Time and Guarantee:Inside of one calendar year following getting items.
2.Other Provider: Including modeling variety manual, set up guide, and difficulty resolution information, etc

FAQ

one.Q:Can you make as for each client drawing?
A: Yes, we supply CZPT service for customers accordingly. We can use customer’s nameplate for gearboxes.
two.Q:What is your conditions of payment ?
A: thirty% deposit ahead of creation,stability T/T ahead of shipping and delivery.
three.Q:Are you a trading organization or company?
A:We are a manufacurer with CZPTd gear and experienced personnel.
four.Q:What is your creation capacity?
A:4000-5000 PCS/Thirty day period
5.Q:Cost-free sample is CZPT or not?
A:Of course, we can provide free of charge sample if buyer agree to pay for the courier cost
six.Q:Do you have any certification?
A:Of course, we have CE certification and SGS certification report.

Get in touch with details:
Ms Lingel Pan
For any inquiries just come to feel cost-free ton speak to me. Several many thanks for your kind consideration to our organization!