Solution Description
Principal Characteristics:
1) Created of higher high quality material, non-rustingBoth flange and foot mounting CZPT and suited for all-round installation
2) Massive output torque and high radiating efficiency
3)Exact grinding helical equipment with Sleek managing and low sounds, no deformation,can perform prolonged time in dreadful problem
4)Nice visual appeal, resilient support existence and small quantity, compact composition
five)The two two and three stage CZPT with broad ratio selection from 5 to 200
six)CZPT output shaft diameter CZPT 18-22-28-32-forty-50mm
seven)Modular building enlarge ratio from 5 to 1400
Major Components:
1)housing with aluminium alloyand cast iron substance
2)Output Shaft Materials:20CrMnTi
3)Very good high quality no sound bearings to hold extended support daily life
4)Higher efficiency oil seal to avert from oil leakage
Applications:
G3 Series helical gear motor are wide utilised for all kinds of automated products, such as chip removal machine, conveyor, packaging gear, woodworking equipment, farming products, slurry scraper ,dryer, mixer and so on.
In depth Photos
Merchandise Parameters
(n1=1400r/min 50hz) | |||||||||||||||||
norminal ratio | five | ten | fifteen | twenty | 25 | 30 | forty | 50 | sixty | 80 | 100 | one hundred | one hundred twenty | 160 | 200 | ||
.1kw | output shaft | Ø18 | Ø22 | ||||||||||||||
n2* (r/min) | 282 | 138 | 92 | 70 | 56 | forty six | 35 | 28 | 23 | 18 | 14 | – | eleven | 9 | 7 | ||
M2(Nm) | 50hz | 3.two | six.five | nine.8 | 12.9 | sixteen.one | 19.six | twenty five.seven | 31.one | 37.five | 49.5 | 62.9 | – | 76.one | 100.7 | one hundred twenty five.4 | |
60hz | 3 | five | 8 | 11 | 13 | seventeen | 21 | 26 | 31 | 41 | 52 | – | sixty three | eighty four | 105 | ||
Fr1(N) | 588 | 882 | 980 | 1180 | 1270 | 1370 | 1470 | 1570 | 2160 | 2450 | 2450 | 2450 | 2450 | 2450 | 2450 | ||
Fr2(N) | 176 | ||||||||||||||||
norminal ratio | five | ten | fifteen | 20 | 25 | 30 | forty | 50 | 60 | eighty | 100 | one hundred | one hundred twenty | 160 | two hundred | ||
.2kw | output shaft | Ø18 | Ø22 | Ø28 | |||||||||||||
n2* (r/min) | 282 | 138 | 92 | 70 | 56 | 45 | 35 | 29 | 23 | 18 | fourteen | 13 | 12 | 8 | 7 | ||
M2(Nm) | 50hz | 6.5 | 12.6 | 19.one | 26.three | 32.6 | 38.9 | fifty.4 | sixty three | 75.6 | a hundred.eight | 103.nine | one hundred twenty five.4 | a hundred and fifty | two hundred.4 | 250.seven | |
60hz | five.4 | ten.5 | sixteen.six | 21.9 | 27.1 | 32.4 | 42 | fifty two.5 | sixty three | 84 | 86.six | 104.5 | a hundred twenty five | 167 | 208.nine | ||
Fr1(N) | 588 | 882 | 980 | 1180 | 1270 | 1760 | 1860 | 1960 | 2160 | 2450 | 2450 | 2840 | 3330 | 3430 | 3430 | ||
Fr2(N) | 196 | ||||||||||||||||
norminal ratio | 5 | 10 | fifteen | 20 | 25 | thirty | forty | 50 | 60 | 80 | a hundred | a hundred | one hundred twenty | a hundred and sixty | 200 | ||
.4kw | output shaft | Ø22 | Ø28 | Ø32 | |||||||||||||
n2* (r/min) | 288 | one hundred forty four | 92 | 72 | fifty eight | 47 | 36 | 29 | 24 | 18 | fourteen | 14 | twelve | nine | 7 | ||
M2(Nm) | 50hz | twelve.nine | twenty five | 38.six | 51.4 | sixty five.four | 78.two | 100.seven | one hundred twenty five.four | a hundred and fifty | 200.4 | 206.8 | 250.7 | 301.1 | 400.7 | 461.eight | |
60hz | 10.7 | 20.8 | 32.1 | forty two.9 | fifty four.five | 65.two | 83.nine | 104.5 | one hundred twenty five | 167 | 172.3 | 208.9 | 250.nine | 333.9 | 384.8 | ||
Fr1(N) | 882 | 1180 | 1370 | 1470 | 1670 | 2550 | 2840 | 3140 | 3430 | 3430 | 3430 | 4900 | 5880 | 5880 | 5880 | ||
Fr2(N) | 245 | ||||||||||||||||
norminal ratio | five | 10 | 15 | 20 | 25 | 30 | 40 | fifty | sixty | eighty | 100 | a hundred | a hundred and twenty | 160 | 200 | ||
.75kw | output shaft | Ø28 | Ø32 | Ø40 | |||||||||||||
n2* (r/min) | 278 | 140 | ninety four | sixty nine | 58 | forty six | 35 | 29 | 24 | 18 | fourteen | 14 | eleven | 9 | 7 | ||
M2(Nm) | 50hz | 24.six | forty eight.two | 72.9 | ninety seven.five | 122.1 | 145.seven | 187.five | 235.seven | 282.nine | 376.one | 387.9 | 439 | 527 | 703 | 764 | |
60hz | twenty.5 | forty.two | 60.seven | eighty one.three | 201.eight | 121.4 | 156.3 | 196.four | 235.7 | 313.four | 323.two | 366 | 439 | 585 | 732 | ||
Fr1(N) | 1270 | 1760 | 2160 | 2350 | 2450 | 4571 | 4210 | 4610 | 5490 | 5880 | 5880 | 7060 | 7060 | 7060 | 7060 | ||
Fr2(N) | 294 | ||||||||||||||||
norminal ratio | five | 10 | 15 | 20 | 25 | 30 | forty | fifty | 60 | 80 | one hundred | one hundred | a hundred and twenty | 160 | 200 | ||
one.5kw | output shaft | Ø32 | Ø40 | Ø50 | |||||||||||||
n2* (r/min) | 280 | one hundred forty | ninety three | 70 | 55 | forty seven | 34 | 27 | 24 | 17 | fourteen | thirteen | twelve | eight | seven | ||
M2(Nm) | 50hz | forty eight.2 | ninety seven.5 | a hundred forty five.seven | 193.nine | 242.1 | 272 | 351 | 439 | 527 | 703 | 724 | 878 | 1060 | 1230 | 1230 | |
60hz | 40.2 | eighty one.three | 121.four | 161.6 | 201.eight | 226 | 293 | 366 | 439 | 585 | 603 | 732 | 878 | 1170 | 1230 | ||
Fr1(N) | 1760 | 2450 | 2840 | 3230 | 3820 | 5100 | 5880 | 7060 | 7060 | 7060 | 7060 | 9800 | 9800 | 9800 | 9800 | ||
Fr2(N) | 343 | ||||||||||||||||
norminal ratio | 5 | 10 | fifteen | 20 | 25 | 30 | 40 | fifty | 60 | 80 | a hundred | ||||||
2.2kw | output shaft | Ø40 | Ø50 | ||||||||||||||
n2* (r/min) | 272 | 136 | ninety five | sixty eight | 54 | 45 | 36 | 28 | 24 | eighteen | 14 | ||||||
M2(Nm) | 50hz | 67 | 133 | 200 | 266 | 332 | 399 | 515 | 644 | 773 | 1571 | 1230 | |||||
60hz | 56 | 111 | 167 | 221 | 277 | 332 | 429 | 537 | 644 | 858 | 1080 | ||||||
Fr1(N) | 2160 | 3140 | 3530 | 4571 | 4700 | 6960 | 7250 | 8620 | 9800 | 9800 | 9800 | ||||||
Fr2(N) | 392 |
Define and mounting dimension:
G3FM: A few Stage Gear MOTOR WITH FLANGE (n1=1400r/min) | ||||||||||||||||||||
Electrical power kw | output shaft | ratio | A | F | I | J | M | O | O1 | P | Q | R | S | T | U | W | X | Y | Y1 | |
normal | brake | |||||||||||||||||||
.1kw | Ø18 | five-ten-15-twenty-25-30-forty-fifty | 236 | 270 | 192.five | eleven | sixteen.5 | a hundred and seventy | 4 | 10 | 30 | a hundred forty five | 35 | eighteen | 20.five | 129 | 6 | 157 | eighty | 81 |
Ø22 | 60-eighty-100-a hundred and twenty-a hundred and sixty-two hundred | 262 | 296 | 197.five | 11 | 19 | 185 | 4 | 12 | forty | 148 | 47 | 22 | 24.five | 129 | 6 | 171.five | 89.five | eighty three.five | |
.2kw | Ø18 | five-10-fifteen-twenty-twenty five | 267 | 270 | 192.five | 11 | 16.five | 170 | four | 10 | thirty | one hundred forty five | 35 | eighteen | twenty.5 | 129 | 6 | 161 | eighty | eighty one |
Ø22 | thirty-forty-fifty-60-eighty-one hundred | 293 | 296 | 197.five | eleven | 19 | 185 | 4 | 12 | 40 | 148 | forty seven | 22 | 24.5 | 129 | 6 | 171.five | 89.five | 83.5 | |
Ø28 | a hundred-one hundred twenty-one hundred sixty-200 | 306 | 309.5 | 208.5 | 11 | 23.five | 215 | 4 | 15 | 45 | a hundred and seventy | 50 | 28 | 31 | 129 | 8 | 198.5 | 105.five | 88 | |
.4kw | Ø22 | 5-ten-fifteen-20-twenty five | 314 | 324.five | 204 | 11 | 19 | 185 | four | twelve | forty | 148 | forty seven | 22 | 24.five | 139 | 6 | 171.five | 89.five | 88.5 |
Ø28 | 30-40-fifty-60-80-100 | 330 | 337.5 | 215 | 11 | 23.5 | 215 | four | fifteen | 45 | a hundred and seventy | fifty | 28 | 31 | 139 | 8 | 198.5 | a hundred and five.five | ninety three | |
Ø32 | a hundred-a hundred and twenty-160-200 | 349 | 357 | 229.5 | thirteen | 28.5 | 250 | four | 15 | fifty five | 180 | 60 | 32 | 35 | 139 | ten | 234 | 126 | 98 | |
.75kw | Ø28 | 5-10-15-20-twenty five | 350.five | 343.five | 227.five | eleven | 23.5 | 215 | 4 | fifteen | 45 | one hundred seventy | fifty | 28 | 31 | 159 | 8 | 198.5 | 105.five | 103 |
Ø32 | 30-40-50-60-80-100 | 379.5 | 387 | 242 | thirteen | 28.five | 250 | four | 15 | 55 | a hundred and eighty | sixty | 32 | 35 | 159 | ten | 234 | 126 | 108 | |
Ø40 | one hundred-120-one hundred sixty-200 | 401.5 | 408.5 | 270 | 18 | 34 | 310 | five | eighteen | sixty five | 230 | 71 | 40 | 43 | 185 | twelve | 284 | 149 | 126.five | |
one.5kw | Ø32 | 5-ten-fifteen-20-twenty five | 420.five | 441 | 254 | 13 | 28.5 | 250 | five | fifteen | 55 | 180 | sixty | 32 | 35 | 185 | ten | 234 | 126 | 121 |
Ø40 | thirty-40-50-60-80-one hundred | 457.5 | 478 | 270 | eighteen | 34 | 310 | 5 | eighteen | sixty five | 230 | 71 | forty | 43 | 185 | 12 | 284 | 149 | 126.five | |
Ø50 | a hundred-one hundred twenty-160-two hundred | 485.five | 506 | 300 | 22 | forty | 360 | five | twenty five | 75 | 270 | 83 | fifty | 53.five | 185 | fourteen | 325 | 173.5 | 132.5 | |
two.2kw | Ø40 | five-10-15-20-twenty five | 466.five | 487 | 270 | eighteen | 34 | 310 | 5 | eighteen | 65 | 230 | seventy one | 40 | forty three | 185 | twelve | 284 | 149 | 126.5 |
Ø50 | 30-40-50-sixty-eighty-100 | 510.5 | 531 | three hundred | 22 | 40 | 360 | 5 | twenty five | seventy five | 270 | eighty three | 50 | fifty three.5 | 185 | fourteen | 325 | 173.five | 132.5 |
G3LM: 3 Stage Gear MOTOR WITH FOOT (n1=1400r/min) | ||||||||||||||||||||
Electrical power kw | output shaft | ratio | A | D | E | F | J | G | H | K | P | S | T | U | V | W | X | Y | Y1 | |
regular | brake | |||||||||||||||||||
.1kw | Ø18 | 5-10-15-20-25-30-40-fifty | 236 | 270 | 40 | one hundred ten | 135 | sixteen.five | sixty five | 9 | 45 | 30 | eighteen | 20.five | 129 | 183 | six | 133 | 85 | ten |
Ø22 | 60-eighty-a hundred-one hundred twenty-a hundred and sixty-200 | 262 | 296 | 65 | one hundred thirty | one hundred fifty five | 19 | 90 | 11 | 55 | forty | 22 | 24.5 | 129 | 193 | 6 | 139.five | ninety | twelve | |
.2kw | Ø18 | five-10-fifteen-twenty-25 | 267 | 270 | 40 | 110 | 135 | sixteen.five | 65 | nine | 45 | thirty | 18 | twenty.5 | 129 | 183 | 6 | 133 | 85 | 10 |
Ø22 | thirty-forty-fifty-sixty-eighty-100 | 293 | 296 | 65 | 130 | 155 | 19 | 90 | eleven | fifty five | forty | 22 | 24.5 | 129 | 193 | six | 139.5 | 90 | twelve | |
Ø28 | one hundred-one hundred twenty-a hundred and sixty-200 | 306 | 309.5 | ninety | a hundred and forty | 175 | 23.5 | a hundred twenty five | 11 | 65 | 45 | 28 | 31 | 129 | 203 | eight | a hundred and seventy | 110 | fifteen | |
.4kw | Ø22 | five-10-15-20-twenty five | 314 | 324.five | 65 | 130 | 155 | 19 | ninety | 11 | 55 | forty | 22 | 24.five | 139 | 199.five | 6 | 141.five | ninety | 12 |
Ø28 | thirty-40-fifty-sixty-eighty-a hundred | 330 | 337.5 | 90 | a hundred and forty | one hundred seventy five | 23.5 | one hundred twenty five | 11 | sixty five | forty five | 28 | 31 | 139 | 210 | 8 | a hundred and seventy | 110 | 15 | |
Ø32 | one hundred-120-one hundred sixty-200 | 349 | 357 | 130 | one hundred seventy | 208 | 28.5 | a hundred and seventy | 13 | 70 | fifty five | 32 | 35 | 139 | 226 | 10 | 198 | 130 | eighteen | |
.75kw | Ø28 | five-ten-15-20-25 | 350.5 | 343.5 | 90 | a hundred and forty | a hundred seventy five | 23.5 | a hundred twenty five | 11 | 65 | 45 | 28 | 31 | 159 | 222 | 8 | 170 | 110 | fifteen |
Ø32 | 30-forty-50-sixty-eighty-a hundred | 379.5 | 387 | a hundred thirty | 170 | 208 | 28.5 | 170 | thirteen | 70 | fifty five | 32 | 35 | 159 | 238.5 | ten | 198 | one hundred thirty | eighteen | |
Ø40 | a hundred-one hundred twenty-160-200 | 401.5 | 408.five | 150 | 210 | 254 | 34 | 196 | fifteen | ninety | 65 | forty | 43 | 185 | 249 | 12 | 230 | 150 | 20 | |
one.5kw | Ø32 | five-ten-fifteen-twenty-25 | 420.5 | 441 | 130 | a hundred and seventy | 208 | 28.5 | 170 | thirteen | 70 | fifty five | 32 | 35 | 185 | 250.five | 10 | 198 | one hundred thirty | eighteen |
Ø40 | 30-forty-50-60-80-100 | 457.five | 478 | one hundred fifty | 210 | 254 | 34 | 196 | 15 | ninety | sixty five | forty | forty three | 185 | 260 | 12 | 230 | 150 | 20 | |
Ø50 | one hundred-a hundred and twenty-one hundred sixty-two hundred | 485.5 | 506 | 160 | 230 | 290 | 40 | 210 | 18 | a hundred | 75 | 50 | 53.five | 185 | 288 | 14 | 265 | a hundred and seventy | twenty five | |
two.2kw | Ø40 | five-10-fifteen-twenty-25 | 466.five | 487 | one hundred fifty | 210 | 254 | 34 | 196 | 15 | 90 | sixty five | 40 | forty three | 185 | 260 | twelve | 230 | one hundred fifty | twenty |
Ø50 | 30-40-fifty-sixty-eighty-one hundred | 510.five | 531 | a hundred and sixty | 230 | 290 | 40 | 210 | 18 | a hundred | seventy five | fifty | fifty three.five | 185 | 288 | 14 | 265 | one hundred seventy | 25 |
G3FS: IEC Gear REDUCER WITH FOOT (n1=1400r/min) | |||||||||||||||||||||||||
Electrical power kw | output shaft | ratio | A | B | C | F | I | J | L | M | N | O | O1 | P | Q | R | S | S1 | T | T1 | W | W1 | X | Y | Y1 |
.12kw | Ø18 | five-ten-15-20-twenty five-30-40-50 | 147 | ninety five | a hundred and fifteen | 154 | eleven | 16.5 | 4.five | 170 | one hundred forty | 4 | 10 | thirty | a hundred forty five | 35 | 18 | 11 | 20.5 | twelve.eight | 6 | four | 163 | 80 | 86.5 |
Ø22 | sixty-eighty-100-a hundred and twenty-one hundred sixty-two hundred | 173 | ninety five | 115 | 164 | 11 | 19 | four.five | 185 | one hundred forty | four | 12 | forty | 148 | 47 | 22 | 11 | 24.five | twelve.eight | six | 4 | 171.five | 89.5 | 89 | |
.18kw | Ø18 | five-ten-fifteen-20-25 | 147 | ninety five | 115 | 154 | 11 | 16.5 | 4.five | one hundred seventy | a hundred and forty | 4 | 10 | 30 | a hundred forty five | 35 | 18 | eleven | twenty.5 | 12.8 | 6 | four | 163 | 80 | 86.5 |
Ø22 | 30-40-50-sixty-80-a hundred | 173 | ninety five | a hundred and fifteen | 164 | 11 | 19 | four.5 | 185 | one hundred forty | 4 | twelve | 40 | 148 | forty seven | 22 | eleven | 24.five | twelve.eight | six | 4 | 171.5 | 89.5 | 89 | |
Ø28 | a hundred-a hundred and twenty-one hundred sixty-200 | 186.5 | ninety five | one hundred fifteen | 186 | 11 | 23.5 | four.five | 215 | a hundred and forty | four | fifteen | 45 | a hundred and seventy | fifty | 28 | 11 | 31 | 12.eight | eight | four | 198.five | one zero five.5 | ninety three.5 | |
.37kw | Ø22 | five-10-15-20-25 | 181.5 | a hundred and ten | 130 | 164 | 11 | 19 | 4.five | 185 | 160 | four | twelve | 40 | 148 | 47 | 22 | fourteen | 24.five | sixteen.3 | 6 | five | 201 | 89.five | 99 |
Ø28 | thirty-forty-50-sixty-eighty-a hundred | 198 | one hundred ten | one hundred thirty | 186 | eleven | 23.5 | four.5 | 215 | one hundred sixty | 4 | fifteen | forty five | one hundred seventy | fifty | 28 | fourteen | 31 | 16.three | 8 | five | 198.five | 105.five | 103.five | |
Ø32 | a hundred-120-160-two hundred | 216.5 | a hundred and ten | a hundred thirty | 215 | 13 | 28.5 | four.5 | 250 | a hundred and sixty | 4 | 15 | fifty five | one hundred eighty | 60 | 32 | fourteen | 35 | 16.three | ten | 5 | 234 | 126 | 108.five | |
.75kw | Ø28 | five-10-15-20-twenty five | 206.5 | a hundred thirty | one hundred sixty five | 185 | 11 | 23.five | 4.five | 215 | two hundred | 4 | 15 | forty five | one hundred seventy | 50 | 28 | 19 | 31 | 21.8 | eight | 6 | 216.five | a hundred and five.five | 123.5 |
Ø32 | thirty-40-fifty-60-80-100 | 235 | a hundred thirty | one hundred sixty five | 215 | 13 | 28.five | 4.5 | 250 | 200 | four | fifteen | 55 | a hundred and eighty | 60 | 32 | 19 | 35 | 21.eight | 10 | 6 | 236.five | 126 | 128.five | |
Ø40 | 100-one hundred twenty-one hundred sixty-two hundred | 260.five | a hundred thirty | a hundred sixty five | 270 | 18 | 34 | 4.five | 310 | two hundred | 5 | eighteen | sixty five | 230 | 71 | forty | 19 | forty three | 21.eight | 12 | 8 | 284 | 149 | 134 | |
1.5kw | Ø32 | five-10-15-twenty-twenty five | 252 | one hundred thirty | a hundred sixty five | 215 | thirteen | 28.5 | four.five | 250 | 200 | five | 15 | 55 | 180 | sixty | 32 | 24 | 35 | 27.3 | ten | 8 | 236.five | 126 | 128.five |
Ø40 | thirty-40-50-60-eighty-100 | 293.5 | a hundred thirty | one hundred sixty five | 270 | 18 | 34 | four.5 | 310 | two hundred | 5 | eighteen | sixty five | 230 | seventy one | forty | 24 | 43 | 27.3 | twelve | 8 | 284 | 149 | 134 | |
Ø50 | one hundred-120-160-200 | 321.5 | a hundred thirty | a hundred sixty five | 300 | 22 | forty | 4.five | 360 | two hundred | 5 | twenty five | seventy five | 270 | eighty three | fifty | 24 | 53.five | 27.three | fourteen | eight | 323.five | 173.five | a hundred and forty | |
two.2kw | Ø40 | five-ten-fifteen-20-25 | 290 | one hundred eighty | 215 | 270 | eighteen | 34 | 5.5 | 310 | 250 | 5 | 18 | 65 | 230 | 71 | 40 | 28 | forty three | 31.3 | twelve | eight | 284 | 149 | 134 |
Ø50 | thirty-40-fifty-sixty-80-a hundred | 334 | a hundred and eighty | 215 | three hundred | 22 | forty | 5.five | 360 | 250 | five | twenty five | 75 | 270 | eighty three | 50 | 28 | 53.five | 31.three | fourteen | 8 | 323.five | 173.5 | one hundred forty |
G3LS: IEC Equipment REDUCER WITH FOOT (n1=1400r/min) | |||||||||||||||||||||||||
Power kw | output shaft | ratio | A | B | C | D | E | F | G | H | J | K | L | N | P | S | S1 | T | T1 | W | W1 | X | Y | Y1 | Z |
.12kw | Ø18 | five-ten-15-20-twenty five-thirty-40-fifty | 147 | ninety five | 115 | forty | a hundred and ten | a hundred thirty five | sixty five | 9 | sixteen.five | forty five | 4.5 | one hundred forty | thirty | 18 | eleven | 20.five | twelve.eight | six | 4 | 138.5 | 85 | 10 | M8 |
Ø22 | sixty-80-one hundred-one hundred twenty-160-two hundred | 173 | 95 | a hundred and fifteen | 65 | 130 | 154 | 90 | eleven | 19 | 55 | four.five | one hundred forty | forty | 22 | 11 | 24.5 | twelve.eight | six | 4 | 141 | 90 | twelve | M8 | |
.18kw | Ø18 | 5-10-15-20-twenty five | 147 | 95 | 115 | 40 | a hundred and ten | 135 | sixty five | nine | 16.5 | 45 | 4.5 | a hundred and forty | 30 | 18 | eleven | twenty.five | 12.eight | 6 | 4 | 138.5 | eighty five | ten | M8 |
Ø22 | 30-40-fifty-sixty-80-one hundred | 173 | ninety five | a hundred and fifteen | sixty five | one hundred thirty | 154 | ninety | eleven | 19 | 55 | 4.five | a hundred and forty | forty | 22 | eleven | 24.5 | twelve.8 | six | four | 141 | ninety | twelve | M8 | |
Ø28 | 100-a hundred and twenty-one hundred sixty-200 | 186.5 | ninety five | a hundred and fifteen | ninety | 140 | 175 | 125 | 11 | 23.5 | 65 | 4.five | one hundred forty | forty five | 28 | 11 | 31 | twelve.eight | 8 | 4 | one hundred seventy | 110 | 15 | M8 | |
.37kw | Ø22 | five-ten-15-20-25 | 181.five | 110 | 130 | sixty five | 130 | 154 | ninety | eleven | 19 | 55 | four.5 | 160 | forty | 22 | fourteen | 24.5 | sixteen.three | 6 | 5 | 151 | ninety | 12 | M8 |
Ø28 | thirty-forty-fifty-sixty-80-one hundred | 198 | one hundred ten | one hundred thirty | 90 | a hundred and forty | 175 | a hundred twenty five | eleven | 23.five | sixty five | 4.five | a hundred and sixty | forty five | 28 | fourteen | 31 | 16.three | eight | five | a hundred and seventy | a hundred and ten | 15 | M8 | |
Ø32 | one hundred-120-a hundred and sixty-200 | 216.five | one hundred ten | 130 | 130 | one hundred seventy | 208 | a hundred and seventy | thirteen | 28.five | 70 | 4.5 | one hundred sixty | fifty five | 32 | fourteen | 35 | sixteen.3 | ten | 5 | 198 | one hundred thirty | eighteen | M8 | |
.75kw | Ø28 | five-ten-15-twenty-twenty five | 206.5 | 130 | 165 | 90 | one hundred forty | one hundred seventy five | a hundred twenty five | eleven | 23.five | sixty five | 4.5 | two hundred | forty five | 28 | 19 | 31 | 21.8 | eight | 6 | 186.5 | 110 | fifteen | M10 |
Ø32 | 30-40-fifty-sixty-eighty-100 | 235 | 130 | 165 | a hundred thirty | one hundred seventy | 208 | one hundred seventy | 13 | 28.5 | 70 | 4.5 | two hundred | fifty five | 32 | 19 | 35 | 21.eight | ten | six | 201.5 | a hundred thirty | 18 | M10 | |
Ø40 | a hundred-a hundred and twenty-a hundred and sixty-two hundred | 260.five | a hundred thirty | a hundred sixty five | a hundred and fifty | 210 | 254 | 196 | 15 | 34 | 90 | 4.5 | 200 | 65 | 40 | 19 | 43 | 21.8 | 12 | 8 | 230 | one hundred fifty | 20 | M10 | |
1.5kw | Ø32 | five-ten-fifteen-twenty-twenty five | 252 | 130 | a hundred sixty five | one hundred thirty | 170 | 208 | 170 | thirteen | 28.five | 70 | 4.five | two hundred | 55 | 32 | 24 | 35 | 27.3 | ten | 8 | 201.five | one hundred thirty | 18 | M10 |
Ø40 | thirty-forty-fifty-60-eighty-a hundred | 293.five | a hundred thirty | a hundred sixty five | 150 | 210 | 254 | 196 | 15 | 34 | 90 | 4.five | 200 | sixty five | 40 | 24 | forty three | 27.3 | 12 | 8 | 230 | a hundred and fifty | 20 | M10 | |
Ø50 | a hundred-one hundred twenty-160-two hundred | 321.5 | 130 | 165 | one hundred sixty | 230 | 290 | 210 | eighteen | forty | 100 | 4.5 | two hundred | seventy five | fifty | 24 | 53.five | 27.3 | fourteen | 8 | 265 | one hundred seventy | 25 | M10 | |
2.2kw | Ø40 | 5-10-15-twenty-twenty five | 290 | one hundred eighty | 215 | 150 | 210 | 254 | 196 | 15 | 34 | 90 | five.5 | 250 | 65 | 40 | 28 | 43 | 31.three | twelve | eight | 230 | a hundred and fifty | 20 | M12 |
Ø50 | thirty-40-fifty-60-80-a hundred | 334 | one hundred eighty | 215 | 160 | 230 | 290 | 210 | 18 | forty | one hundred | five.five | 250 | seventy five | 50 | 28 | fifty three.5 | 31.three | 14 | eight | 265 | a hundred and seventy | 25 | M12 |
Organization Profile
We are a professional reducer company positioned in HangCZPT, ZHangCZPTg province.Our foremost goods is full range of RV571-one hundred fifty worm reducers , also supplied GKM hypoid helical gearbox, GRC inline helical gearbox, Pc units, UDL Variators and AC Motors, G3 helical gear motor.Goods are widely utilised for applications this kind of as: foodstuffs, ceramics, packing, chemical compounds, pharmacy, plastics, paper-generating, building machinery, metallurgic mine, environmental safety engineering, and all varieties of automatic lines, and assembly traces.With rapidly shipping, excellent soon after-sales support, CZPTd making facility, our goods offer well both at property and abroad. We have exported our reducers to Southeast Asia, CZPT CZPTpe and the Center CZPT and so on.Our intention is to develop and innovate on the foundation of higher top quality, and create a good status for reducers.
Workshop:
Exhibition
ZheCZPT PTC Fair:
Packaging & Delivery
Following Sales Provider
1.Routine maintenance Time and Guarantee:Within one particular yr following obtaining goods.
2.Other Services: Which includes modeling selection guide, set up manual, and issue resolution manual, etc
FAQ
1.Q:Can you make as for every buyer drawing?
A: Of course, we supply CZPT support for customers appropriately. We can use customer’s nameplate for gearboxes.
2.Q:What is your phrases of payment ?
A: 30% deposit prior to production,stability T/T ahead of supply.
three.Q:Are you a trading organization or manufacturer?
A:We are a manufacurer with CZPTd equipment and skilled personnel.
4.Q:What’s your manufacturing potential?
A:4000-5000 PCS/Month
five.Q:Free of charge sample is CZPT or not?
A:Sure, we can provide cost-free sample if customer agree to spend for the courier value
six.Q:Do you have any certification?
A:Of course, we have CE certificate and SGS certification report.
Contact information:
Ms Lingel Pan
For any queries just really feel free ton contact me. Several many thanks for your type focus to our firm!