Condition: New
Type: Wheel Tractor
By wheel: 4WD
Rated Power (HP): 45HP 50HP 55HP
Usage: Farm Tractor
Drive Type: Gear Drive
Certificate: ce
Warranty: 2 years
Key Selling Points: Multifunctional
Marketing Type: New Product 2571
Machinery Test Report: Provided
Video outgoing-inspection: Provided
Warranty of core components: 1.5 years
Core Components: Motor, Gearbox, Engine, Bearing
Engine Brand: YANMAR
Applicable Industries: Farms, Home Use, Retail
Showroom Location: None
Weight: 2160 KG
Product name: Agricultural Tractor
Transmission:: Two shafts, 4X(2+1) composed
Clutch: Dry-friction, single disc and dual-stage
Engine: 4 Cylinder Diesel Engine
PTO Speed: 540/1000 rpm/min
Steering Type: Full Hydraulic power steering
Options: Cabin
Ad price: Front end loader
Tractor price: CONTACT Wendy From Jiulin Tractor
More implements: CONTACT Wendy From Jiulin Tractor
Packaging Details: no packing
Port: HangZhou port china

Low Oil Consumption High Efficiency Jiulin Tractor Strong Power Good Performances.1. 50 horsepower famous brand engine–Weichai Engine, discharge upgrade, low fuel consumption, large torque backup, low power is strong.2. Adopt double clutch, by using 8 + 4, options 8+8 shuttle shift, creeper gear, side hang when variable speed, speed matching is reasonable, high work efficiency.3. Double speed power output, according to the operation needs can choose 540/1000 r/min or 540/760 r/min.4. Enhanced oil cylinder of front drive axle, gear, high bearing capacity is strong.5.Hydraulic oil supply independently, full hydraulic pressure independent steering small turning radius.

Main parameters
Drive type4×4four-wheel drive
Engine BrandLD
Engine Type4105
Fuel tank capacity L47
Rating power of engine KW/RPM40.4/2400
Fuel consumption @ nominal power (g/kw.h)contact Wendy
Air Intake TypeNaturally Aspirated
Displacement Lcontact Wendy
Air filter type/sizeOIL BATH or Dry
Torque reservecontact Wendy
Transmission system
Clutch type/sizeOne-piece,dry,double-action
No. of gears (F+R)8F+2R/8F+8R
Shift methodmechanical sleeve
Max. speedCONTACT Wendy
Gear positionside position
Hydraulic system
Hydraulic output flow rate (L / MIN)contact Wendy
Hydraulic output valve1/2
Hydraulic filter types and capacitycontact Wendy
Working device
Three-point-linkage Three-point suspension type 1
PTO Speed540/760 or 540/1000
Lifting Capacity (kn)Maximum lifting force at 610mm(KN) is 9.2
Tillage depth adjustmentposition,float,draft,draft mix control
The whole machine size (dimensions) mm3660×1500 ×2130
Min. operation mass2100-
Wheel base (mm)1920
Mini turning Radius (m)Unilateral braking 2.7±0.20/2.85±0.20Not unilateral braking 3.0±0.30/3.15±0.30
Rated traction force(N)
Minimum ground clearance (mm)360
Air conditioning cabOptional
Front/rear wheel tread1000-1350(common1200)
tyre sizefront wheel 6.00-16/6.5-16/7.5-16rear 9.4-24/11.2-24/12.4-24
Braking and steering
Braking systemhydrostaticpedal control,disc brake,
Steering typehydraulic steering
Steering Angle (4 x4)Front axle Max.Steering angle 45°
(options: all these types can Optional for swing drawbar, front/rear ballast) This parameter table is for reference only, everything is based on actual products
Product Highlights1.Factory with 20 years experience ensure the products quality.2.Two years warranty period.3.For easy-damage parts, we will send you together with the tractor for free.4.During warranty period, free spare parts for quality-problem spare parts replacement.5.Multi-selection of configuration. Company profile ZheJiang Jiulin Import and Export Co Ltd is on the branch company of HangZhou Zhongrui Group. HangZhou Zhongrui Group is a comprehensive group corporation approved by Commerce of the People’s Republic of China with import-export operation right of international trade and industrial business. HangZhou Zhongrui Group insists on creationg an international brand development strategy based on international trade, bio-innovation as a driving force, logistics operations as a platform for extending business scope. The corporation has many partners in various fields, with the 13 subsidiaries and manufacturing enterprises and offices in Hong Kong, ZheJiang , HangZhou, HangZhou, HangZhou and other cities. With years’ meticulous operation, HangZhou Zhongrui Group has been widely praised by all circles in the society.Many subsidiaries of the Group have been awarded many honorary titles, such as ‘Advance Foreign Trade Enterprise’, ‘AAA Credit Enterprise’ by banks, ‘AA Grade Administrative Enterprise’ by customs, ‘AAA Grade Credit Enterprise’ by CCCMC, ‘The top 100 foreign Trade Enterprises of ZheJiang Province’, ‘Recycling Economy Pilot Enterprise’, ‘Energy Conservation & Emission Reduction Experimental Enterprises’, etc. Meanwhile, the Group has got comprehensive credit up to 800 million U.S. Dollars granted from 4 major state-owned banks and other joint-stock banks in China, among which HangZhou Zhongrui Native Produce Co., Ltd gets up to 650 million U.S. Dollars for further development.Now the Group has 760 Staffs, and most of them have Bachelor Degree or above. With years’ development, we have established the foundation for the core-competitiveness. The corporate will continue to adhere to the concept of ‘supreme service and mutual benefits’, to achieve the Group strategic objectives of sustainable development. We are striving to connect the domestic and international markets and create a new chapter with all friends in all lines.

The Parts of a Gearbox

There are many parts of a Gearbox, and this article will help you understand its functions and components. Learn about its maintenance and proper care, and you’ll be on your way to repairing your car. The complexity of a Gearbox also makes it easy to make mistakes. Learn about its functions and components so that you’ll be able to make the best choices possible. Read on to learn more. Then, get your car ready for winter!


Gearboxes are fully integrated mechanical components that consist of a series of gears. They also contain shafts, bearings, and a flange to mount a motor. The terms gearhead and gearbox are not often used interchangeably in the motion industry, but they are often synonymous. Gearheads are open gearing assemblies that are installed in a machine frame. Some newer designs, such as battery-powered mobile units, require tighter integration.
The power losses in a gearbox can be divided into no-load and load-dependent losses. The no-load losses originate in the gear pair and the bearings and are proportional to the ratio of shaft speed and torque. The latter is a function of the coefficient of friction and speed. The no-load losses are the most serious, since they represent the largest proportion of the total loss. This is because they increase with speed.
Temperature measurement is another important preventive maintenance practice. The heat generated by the gearbox can damage components. High-temperature oil degrades quickly at high temperatures, which is why the sump oil temperature should be monitored periodically. The maximum temperature for R&O mineral oils is 93degC. However, if the sump oil temperature is more than 200degF, it can cause seal damage, gear and bearing wear, and premature failure of the gearbox.
Regardless of its size, the gearbox is a crucial part of a car’s drivetrain. Whether the car is a sports car, a luxury car, or a farm tractor, the gearbox is an essential component of the vehicle. There are two main types of gearbox: standard and precision. Each has its own advantages and disadvantages. The most important consideration when selecting a gearbox is the torque output.
The main shaft and the clutch shaft are the two major components of a gearbox. The main shaft runs at engine speed and the countershaft may be at a lower speed. In addition to the main shaft, the clutch shaft has a bearing. The gear ratio determines the amount of torque that can be transferred between the countershaft and the main shaft. The drive shaft also has another name: the propeller shaft.
The gears, shafts, and hub/shaft connection are designed according to endurance design standards. Depending on the application, each component must be able to withstand the normal stresses that the system will experience. Oftentimes, the minimum speed range is ten to twenty m/s. However, this range can differ between different transmissions. Generally, the gears and shafts in a gearbox should have an endurance limit that is less than that limit.
The bearings in a gearbox are considered wear parts. While they should be replaced when they wear down, they can be kept in service much longer than their intended L10 life. Using predictive maintenance, manufacturers can determine when to replace the bearing before it damages the gears and other components. For a gearbox to function properly, it must have all the components listed above. And the clutch, which enables the transmission of torque, is considered the most important component.


A gearbox is a fully integrated mechanical component that consists of mating gears. It is enclosed in a housing that houses the shafts, bearings, and flange for motor mounting. The purpose of a gearbox is to increase torque and change the speed of an engine by connecting the two rotating shafts together. A gearbox is generally made up of multiple gears that are linked together using couplings, belts, chains, or hollow shaft connections. When power and torque are held constant, speed and torque are inversely proportional. The speed of a gearbox is determined by the ratio of the gears that are engaged to transmit power.
The gear ratios in a gearbox are the number of steps a motor can take to convert torque into horsepower. The amount of torque required at the wheels depends on the operating conditions. A vehicle needs more torque than its peak torque when it is moving from a standstill. Therefore, the first gear ratio is used to increase torque and move the vehicle forward. To move up a gradient, more torque is required. To maintain momentum, the intermediate gear ratio is used.
As metal-to-metal contact is a common cause of gearbox failure, it is essential to monitor the condition of these components closely. The main focus of the proactive series of tests is abnormal wear and contamination, while the preventative tests focus on oil condition and additive depletion. The AN and ferrous density tests are exceptions to this rule, but they are used more for detecting abnormal additive depletion. In addition, lubrication is critical to the efficiency of gearboxes.


Daily maintenance is a critical aspect of the life cycle of a gearbox. During maintenance, you must inspect all gearbox connection parts. Any loose or damaged connection part should be tightened immediately. Oil can be tested using an infrared thermometer and particle counters, spectrometric analysis, or ferrography. You should check for excessive wear and tear, cracks, and oil leaks. If any of these components fail, you should replace them as soon as possible.
Proper analysis of failure patterns is a necessary part of any preventative maintenance program. This analysis will help identify the root cause of gearbox failures, as well as plan for future preventative maintenance. By properly planning preventative maintenance, you can avoid the expense and inconvenience of repairing or replacing a gearbox prematurely. You can even outsource gearbox maintenance to a company whose experts are knowledgeable in this field. The results of the analysis will help you create a more effective preventative maintenance program.
It is important to check the condition of the gearbox oil periodically. The oil should be changed according to its temperature and the hours of operation. The temperature is a significant determinant of the frequency of oil changes. Higher temperatures require more frequent changes, and the level of protection from moisture and water reduces by 75%. At elevated temperatures, the oil’s molecular structure breaks down more quickly, inhibiting the formation of a protective film.
Fortunately, the gear industry has developed innovative technologies and services that can help plant operators reduce their downtime and ensure optimal performance from their industrial gears. Here are 10 steps to ensure that your gearbox continues to serve its purpose. When you are preparing for maintenance, always keep in mind the following tips:
Regular vibration analysis is a vital part of gearbox maintenance. Increased vibration signals impending problems. Visually inspect the internal gears for signs of spiraling and pitting. You can use engineers’ blue to check the contact pattern of gear teeth. If there is a misalignment, bearings or housings are worn and need replacement. Also make sure the breathers remain clean. In dirty applications, this is more difficult to do.
Proper lubrication is another key factor in the life of gearboxes. Proper lubrication prevents failure. The oil must be free of foreign materials and have the proper amount of flow. Proper lubricant selection depends on the type of gear, reduction ratio, and input power. In addition to oil level, the lubricant must be regulated for the size and shape of gears. If not, the lubricant should be changed.
Lack of proper lubrication reduces the strength of other gears. Improper maintenance reduces the life of the transmission. Whether the transmission is overloaded or undersized, excessive vibration can damage the gear. If it is not properly lubricated, it can be damaged beyond repair. Then, the need for replacement gears may arise. However, it is not a time to waste a lot of money and time on repairs.

China supplier 504 Tractor form China 50HP 45HP 55HP 60HP 4X4 4WD CE approved farm double strong gearbox diesel mini tractor wd-40 wd40 40wd     agricultural machinery gearboxesChina supplier 504 Tractor form China 50HP 45HP 55HP 60HP 4X4 4WD CE approved farm double strong gearbox diesel mini tractor wd-40 wd40 40wd     agricultural machinery gearboxes